C326-0002 – STANDARD Primary Separator

The Standard 6" Primary Separator by AutoVac is compatible with most central vacuum systems and is highly recommended for systems that have heavy airflow or underground piping. View more C326-0002 product specifications below.

Product Specifications

  • Dimensions:
    60 x 30 in
  • Weight:
    275 lb
  • Recommended Vacuum:
    Gemini Vacuum System
  • Inlet & Outlet Sizes:
    6 in

Equipment Layout

  • A. These lines carry dirt and debris from vacuum cleaning system, one or two lines as required.
  • B. Primary separator vacuum supply lines hook to lower pipe connection on filter separator where dirt enters from vacuum cleaning system. Always connect these lines to a filter separator, never into a vacuum producer directly!
  • C. Hold down leg support 3 locations typical.
  • D. Support pipe every 10 ft. minimum with an approved support system. Never allow pipe to sag. Install hangers as needed. Sway brace as required.
  • E. Primary Separator Model #324-1001.
  • F. 3″, 4” or 6″ dia. pipe respectively carries dirt from system. See pipe system drawings.

Take the Next Step

We're ready to provide you with a cost-effective and energy efficient central vacuum system.